How can I set up the Glow Panel by itself or to another panel?Updated 20 days ago

1. The 'triangular' piece of basswood that came with your panel is the base.
2. The base that came with your Glow can be used to bridge a gap (on your legs, on the couch, etc.), or on an uneven surface (i.e. a couch, bed, etc. the surface cannot have an incline as the Single Light may tumble), or any surface you would not like to heat up (i.e. carpet, finished wood vanity, etc.). The base is made of the same hypoallergenic basswood as your panel. 
3. You can put the Glow on a VESA monitor arm. The panel comes pre-drilled for use with a "ESA-D 75×75mm”compatible mount.
4. The attached handle (on back) is strong enough to hold the Glow on a properly anchored hook applied to the wall. This way, you can have targeted therapy you can stand in front of!
5. You can hold the Glow on any side, but be sure not to touch the guard, as it does get warm. It is most easily held on the short sides to point up at your chest or throat and head while sitting on the base.
6. It also has our proprietary anchors built in to the back on one side, small trapezoid shaped brackets. Use them with the included clamps to attach your Glow to the sauna frame pole below the Hearth Quartet inside your FireLight® Sauna.
7. Tilting: the tilt you see is part of the engineering, you can tilt it on any level surface, by tilting back and letting go! It is that easy. However, all panels are designed to be used Vertically, so do NOT place it upside down or horizontally.

*We do not recommend using the Glow panel FIR plastic sauna tent. It is not made to be used in a 'tent sauna that your head sticks out'. 

We do not suggest use of any of our panels inside a plastic enclosure sauna due to plastic offgassing toxic chemicals and the fact that you need proper clearance from the panel.